CNC

(Prototyping)

Automated CNC drilling and milling machine (double spindle machine)

Drilled hole diameters are getting smaller and smaller. The main challenges are to position precisely and drill quickly.
For more capacitiy - double spindle machine!

Made by: Ernst Lenz Maschinenbau GmbH
Type: DLG 550-2+2-AL
Made in 2010
Technology:
  • Two stations with 2 seperate spindles for special tasks
  • Tool measurement by laser
  • Two separate spindles for special requirements: Drill spindle with air bearing for small holes as well as spindle with ball-bearing for milling and drilling larger holes.
  • Speeds up to 300,000 rpm for drill diameters from 0.1 mm
  • Linear motors for quick and precise movements
  • Max. 9 Ám drill position error
  • High-precision deep processing with contact drilling and milling
  • Position corrected drilling/milling using CCD camera
  • 2D Code- / Barcodescanner

Automated CNC drilling and milling machines

Drilled hole diameters are getting smaller and smaller. The main challenges are to position precisely and drill quickly.

Made by: Ernst Lenz Maschinenbau GmbH
Type: 4 off DLG 615-1-AL:
Made in 2002, 2005, 2007, 2009
Technology:
  • Tool measurement by laser
  • Two separate spindles for special requirements: Drill spindle with air bearing for small holes as well as spindle with ball-bearing for milling and drilling larger holes.
  • Speeds up to 300,000 rpm for drill diameters from 0.1 mm
  • Linear motors for quick and precise movements
  • Max. 9 Ám drill position error
  • High-precision deep processing with contact drilling and milling
  • Position corrected drilling/milling using CCD camera

Automated CNC drilling and milling machine

Besides high accuracy positioning (better than 9Ám) and a quality and economical drilling of the PCB require special materials such as IMS (metal core PCBs for heat management) an optional minimum quantity lubrication. It ensures a low burr cut edge with high productivity.


Made by: Schmoll-Maschinen GmbH
Type: A-MX1-300-DH-CCD
Made in 2015
Technology:
  • Programmable minimum quantity lubrication
  • Tool chain for more than 2800 tools
  • Vacuum Adapter for vibration free machining
  • Tool measurement by laser
  • Speed up to 300,000 rpm for drill diameters from 0.1mm
  • Highly accurate depth drilling and routing via contact
  • Linear motors for fast and precise movements
  • High-precision depth machining by contact drilling and contact milling
  • Optimized Registration using CCD camera

Scoring machine

The scoring machine made by the leading manufacturer LHMT permits simultaneous scoring of circuit boards on both sides, both with standard scoring as well as with jump scoring.

Made by: LHMT
Type: LHMT Scoring System
Made in 2008
Technology:
  • Simultaneous scoring of circuit boards on both sides, both with standard scoring as well as with jump scoring.
  • Tool is aligned via so-called camera targets: this increases the precision of the scoring process
  • Scoring of very thin circuit boards down to 0.5 mm
  • Tolerance of residual material is 50 Ám
  • Equipped with a data matrix code reader
  • After reading in the sequence programme, works fully automatically

Grinding Machine

After plugging process, the surface of the PCB panel is polished planar. This is done with the highest precision, uniformity and low final surface roughness.


Made by: MASS GmbH
Type: SV 100 WV
Made in 2013
Technology:
  • Single sided manual grinding of printed circuit boards
  • Linear bearings on all axes
  • Setting accuracy of the Z-axis 0,22ým
  • Automatic Pressure Control
  • Vacuum to fix the boards on the table
  • Various Grinding wheels for standard grinding and lapping

 

Your personal contact

Markus Lang
+49 30 351 788-522
markus.langcontag.de